• 联系我们
  • 地址:湖北武汉三环科技园
  • 电话:159116031100
  • 传真:027-68834628
  • 邮箱:mmheng@foxmail.com
  • 当前所在位置:首页 - 小语种系
  • 陶瓷多功能切割机常见故障解决方法
  • Solutions to common faults of multifunctional ceramic tile cutting machine

    When using the of multifunctional ceramic tile cutting machine, there will be fractures during cutting, the ceramic tiles are cut out with cracks or the surface is not smooth enough, the two sides are inconsistent in size, and the ceramic tiles are connected in series. So how to solve these problems?

    Solutions to common faults of multifunctional ceramic tile cutting machine:

    (Multifunctional ceramic tile cutting machine)

    1. Break

    If there is a fracture during the ceramic tile processing, first stop the machine and take out the ceramic tile, check whether the blade motor is blocked by foreign matter, and then restart it to see the processing effect; the second is to adjust the amount of cooling water added during the processing of the ceramic tile. (ceramic tile mosaic equipment)There must be sufficient cooling water.

    2. Rift

    If there are cracks in the processed tiles, the blade is generally worn out. After the machine is stopped, the blade should be taken out and replaced.

    3. The surface of the finished product is not smooth

    The surface of the ceramic tile after processing is not smooth. Generally, it is not polished enough and the polishing head is uneven. The ceramic tile cutting machine must ensure that there are enough polishing grinding heads. If the quality of the grinding heads is not good, there will be unevenness;

    4. String together

    Ceramic tile string together, check whether the platform screws are loose and whether there is a gap between the roller and the bearing. Tighten the screw so that there is no gap between the roller and the bearing; adjust the processing speed of the ceramic tile to ensure that the ceramic tile is processed slowly, and cannot be pushed too hard to see the processing effect.

    5. Size head

    The dimensions of the processed tiles are inconsistent on both sides, which is usually caused by incorrect positions of the machine head and the brick outlet. This phenomenon can be solved by adjusting the closing blade of the machine and adjusting the nuts on the left and right sides of the drum to align with the brick outlet. Make sure that the cutting blades of the machine are on the same plane up and down.

    (Multifunctional ceramic tile cutting machine)

    Hongyun Ceramic Machinery is an enterprise integrating R&D, manufacturing, sales and after-sales service of ceramic tile processing equipment manufacturers. It has a group of experienced engineers and professional technicians, and has perfect ceramic tile processing machinery processing capabilities. If you are interested in ceramic multi-function cutting machine, welcome to inquire and order, Foshan Hongyun Ceramic Machinery Co., Ltd.,Address: No. 1, Third Industrial Zone, Baishaqiao Village, Nanhai District, Foshan City, Guangdong Province,China.

    FOSHAN NANHAI HONGYUN CERAMIC MACHNERY CO.,LTD

    Tel:+86 18666532535

    Email: hanistay@foxmail.com

PET Bottle Filling Machine 狗狗币 火币